Configuration
Adding or Changing a User’s Password
1.Highlight the User Name.
2.Press 
to add or change the password assigned to that user.
You can also change the group to which the user is assigned.
Caution Write down the new password and save it in a secure place. If the password is forgotten, the unit must be reset using the Factory Reset Button and all data settings will be lost.
Deleting a User or an Entire Group
Use the 
column to delete a User Name or an entire Group. If the 
is grayed out, then that Group or User cannot be deleted.
1.Highlight 
and press 
.
2.Confirm that you want to delete the User or Group.
Note To delete the User currently logged into the DVR on a local system or a PC running RASplus (Remote Administration System), log that user out of the system first and then delete the user.
Adding a Group
1.Highlight the + Group… field and press 
. A virtual keyboard appears where you can enter the Group name. You can use up to 15 characters, including spaces, for the group name.
2.When you have entered a New Group name, highlight OK and press 
. The New Group Setup screen appears.
Document | 47 |
12/07 |
|
