Insignia HRSD16 manual Browsing with Sequence Mode, Entering the Sequence Mode

Operation

2.Adjust the image using the arrows.

3.Load settings by selecting OK and pressing .

Note Any image adjustments you make are applied to both the live video on the monitors and the recorded video.

Browsing with Sequence Mode

Using the Sequence mode, you can browse through a series of single-view or multi-view formats, depending on which format you have chosen.

Entering the Sequence Mode

Press and hold SEQUENCE for two seconds or longer to display the cameras sequentially.

If you choose...	After you’ve pressed SEQUENCE, the DVR...
Full Sequence	Goes through predefined screen layouts
Cameo Sequence	Displays live cameras sequentially in the bottom
	right screen
One of the multi-view	Goes to the next page
formats

For example, if you press SEQUENCE while in the 2x2 format, the DVR changes pages in the following pattern:

Figure 4-2 Page Sequence

If all the cameras in a page are Off, have lost video, or are set to Covert (unless the user has authority to view covert cameras), then that page is excluded from the sequence.

Note In the Display setup screen (Sequence tab), select Full Sequence for full sequence monitoring or Cameo Sequence for cameo sequence monitoring.

Document 800-00918 Rev E	107
12/07