Makita BFL201F P 13/ 13, Wiring of Lead wires of LED circuit

1 13

P 13/ 13

Wiring diagram

Route Lead wires

under the two tabs.

tab

tabs viewed from

left side

Put Connectors and the slack portion

of Lead wires in this space.

Note:

Be careful not to put Connectors or

the slack portion of Lead wires on

the ribs around LED circuit.

Route Lead wires between

these ribs.

Make sure that

Lead wires are tight

between this portion.

LED circuit

Light holder

Switch unit

Connector

Contents

Main S S O Model No. Description T [1] NECESSARY REPAIRING TOOLS [2] LUBRICATIONS/ GLUING CAUTION: Repair the machine in accordance with Instruction manual or Safety instructions. P 3/ 13 [3] DISASSEMBLY/ASSEMBLY [3]-1. LED job light section [3] -2. Spindle A complete section [3] -2. Spindle A complete section (cont.) [3] -3. Spiral bevel gear 9 section [Correct] [Wrong] [3] -4. Clutch section [3] -4. Clutch section (cont.) [3] -5. Gear case section P 8/ 13 [3] -5. Gear case section (cont.) P 9/ 13 [3] -6. Switch section C Wiring around Controller Controller pin pin [2] Wiring around Stator rib (E) Stator P 13/ 13 Fig. 4 rib Wiring of Lead wires of LED circuit