WIRING INSTRUCTIONS

The wiring of your amplifier will depend on the system and speakers you are using but will either be a stereo, mono, or mixed-mono application. The following pages illustrate the input and output wiring for both types. Please refer to the appropriate diagrams for the system configuration you are using.

The power and speaker wire connections for this amplifier are made via screw tightened terminal blocks. Loosen the screw for the connection to be made and fully insert the wire (strip 1/2" of insulation from the end) under the respective screw on the side panel (crimp-on "U" terminals are provided to simplify wiring and we recommend their use). Tighten the screw down to secure the wire.

1.Power Connection

The battery terminal (+12V) must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block) will reduce the power output and may cause noise and distortion. Use only #12 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed.

2.Ground Connection

The ground terminal (GND) connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#12 or thicker) and connect it between the ground terminal (GND) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted.

3.Remote Turn-On Connection

The amplifier is turned on by applying +12 volts to the remote turn-on terminal (REM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the +12 volts only when the car stereo is turned on. If the car stereo does not provide an Auto-Antenna lead, the remote turn-on lead may be wired to

an "Accessory" or "Radio" terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key, regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents, so #20 gauge

wire may be used for this application.

-4-

 

Page 5 Page 7
Page 6
Image 6
Audiovox PAB-250R manual Wiring Instructions, Power Connection, Ground Connection, Remote Turn-On Connection
Page 5 Page 7

PAB-250R specifications

The Audiovox PAB-250R is a versatile and innovative wireless speaker that has captured the attention of music enthusiasts and casual listeners alike. Designed to deliver high-quality sound and a user-friendly experience, this speaker combines modern technology with an aesthetic appeal.

One of the standout features of the Audiovox PAB-250R is its Bluetooth connectivity, which allows users to wirelessly connect their devices for seamless audio streaming. With a robust Bluetooth range, the speaker can easily connect to smartphones, tablets, and laptops, providing users the freedom to enjoy their favorite tracks without the clutter of wires. The setup process is quick and intuitive, making it accessible for users of all ages and tech-savviness.

In terms of audio quality, the PAB-250R does not disappoint. Equipped with advanced acoustic engineering, it delivers clear highs, warm mids, and deep bass, ensuring a well-rounded listening experience. The speaker incorporates dual drivers, which work in harmony to produce a rich and immersive soundscape. Whether listening to music, podcasts, or audiobooks, users can expect crisp vocals and a balanced overall sound.

Another notable characteristic of the Audiovox PAB-250R is its portability. The compact and lightweight design makes it easy to carry, allowing users to take their music on the go. Whether you are heading to the beach, a picnic, or simply moving from room to room, the speaker’s design ensures it can accompany you effortlessly. Additionally, its robust build quality means it can withstand the rigors of outdoor use.

The PAB-250R also features a long-lasting battery life that supports extended play sessions. With a quick charge capability, it minimizes downtime, allowing users to focus on what matters most: enjoying their favorite audio content.

Furthermore, the speaker includes a user-friendly interface with easy-to-use controls for volume, play, pause, and track navigation, ensuring a hassle-free experience when interacting with the device.

Overall, the Audiovox PAB-250R stands out as an impressive wireless speaker, combining modern features, superior sound quality, and portability, making it an excellent choice for any music lover. Whether you're at home or on the move, the PAB-250R is designed to enhance your audio experience.
Top Page Image Contents