Audiovox PAV-1 manual bp bq br, bn PRE-SETSCAN TUNING PSCAN, bt DISPLAY ANGLE ADJUSTMENT

DISPLAY COLOR CONTROL DISPLAY TINT CONTROL DISPLAY BRIGHTNESS CONTROL

bn PRE-SET SCAN TUNING (PSCAN)

Press and hold the up ( ) or down ( ) side of this button for 2 seconds to scan the 6 stations pre-set into the memories on the AM or FM bands in the selected direction. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station. Press the button again momentarily to stop Pre-Set Scan operation and remain on the selected frequency.

bo LIQUID CRYSTAL DISPLAY PANEL

VIDEO MONITOR

The Liquid Crystal Display (LCD) panel displays the frequency and activated functions of the radio, tape player and optional CD changer. It also provides the color video monitor function for the

auxiliary video input.

bp bq br

display screen. The button is located behind the front panel so the panel must be lowered by pressing the tape Eject button cq or the Display Angle Control bt to access it. Each press of the button will change the screen color in the following order:

BLUE à GREEN à RED à BLACK

bt DISPLAY ANGLE ADJUSTMENT ( )

This button is used to set the angle of the display panel for the best viewing. Each tap of the button will adjust the angle by approximately 8° up to the maximum angle. If the button is held, the display will continue to open to the maximum position. Pressing the button when the display is at the maximum angle will return it to the closed position.

NOTE:The front panel will automically return to the closed position when the ignition is turned off.

bu DISPLAY RECALL (DISP)

These controls are used to adjust the picture quality during	The Display Recall function is used to recall the function and
auxiliary video input modes. The Color control will adjust the	volume setting display after they have disappeared from the
level of color intensity. The Tint control will adjust the level of	screen during Auxiliary video input modes. Pressing the button
green or red in the picture. The Brightness control will make the	will bring these displays back to the screen for 5 seconds.
picture brighter or darker.	cl CASSETTE DOOR
NOTE:The Color and Tint controls are not functional during
AM/FM radio, tape and CD changer modes. The Brightness	To access the cassette door, press the Eject button cq so that
	the panel drops to its lowered position (this function will operate
control is functional in these modes.
bs DISPLAY BACKGROUND COLOR SELECTOR (BGCL)	when the unit is turned off if the ignition switch is "on"). Hold the
	cassette with the exposed tape edge to the right and insert it fully
This function is used to select the background color of the
	into the cassette door until the soft-loading mechanism draws
	-4-