Audiovox PAV-1 manual cq TAPE EJECT BUTTON, cr REMOTE SENSOR, cs RE-SETBUTTON

cq TAPE EJECT BUTTON ( )

Tape playback is stopped, the front panel is lowered and the cassette is ejected by pressing this button. FM Radio operation will automatically resume when the cassette is ejected. After removing the cassette, press the Display Angle Adjustment button bt to return the display panel to the normal position.

NOTE:To prevent damage to the cassette or the mechanism, the Display Angle Adjustment will be disabled until the cassette is removed from the player.

cr REMOTE SENSOR

The sensor for the infrared signal from the wireless remote control is located behind this lens. For optimal operation of the remote control, always aim it toward the sensor.

cs RE-SET BUTTON

A Re-Set button is located on the front of the chassis (front panel must be lowered to access the button). The re-set circuitry is provided to protect the microprocessor circuitry and should only be activated under the following circumstances as it will erase the pre-set memories.

1.Upon initial installation after all wiring is completed.

2.If there is a malfunction of any of the switches on the unit, pressing the Re-Set button may clear the system and return to normal operation.

-6-