Audiovox PAV9 manual Setting the Camera, Watching the Back View Picture, Wiring Connection

CAMERA IN

SETTINGTHECAMERAIN

1.Connect a back up camera video output to the AV1,2 or 3 video input terminals on the rear of the unit.

*When the DVD changer is connected to AV3 video input, the rear view camera can be connected only to AV1 or AV2 video input.

2.Press the MODE button to select radio mode.

3.Press the MENU button to select following picture.

4. Press the SEARCH UP/DOWN button to select CAMERA IN.

5. Press the VOLUME or button to select AV1,2 or 3 mode that rear view camera is connected. Each time you press this button, AV input changes as

AV1 -> AV2 -> AV3 -> OFF

6. Press the CH or button to see either the normal display or 180 reversed display.

WATCHINGTHEBACKVIEWPICTURE

When the vehicle is put in reverse, the monitor displays the back up camera picture.

WIRINGCONNECTION

Connect orange color connection wire named REVERSE GEAR to a switched power output terminal of the R (reverse) gear. See page 26 : BASIC CONNECTIONS.

NOTE

If AV input connected to the rear view camera is selected with the MODE button, the monitor does not show the rear view camera picture. The monitor shows only the WARNING picture.

17