Audiovox PEQ-200 Bp High Pass OUT Front R/L Connectors, Bq High Pass OUT Rear R/L Connectors

REAR PANEL

12

13

14

18

15

16

17

INPUT

INPUT

HIGHPASS

SUBWOOFER

REM

B+

R

L

LEVEL

R OUT

L

R OUT

L

R

OUT

L

_ GND

FRONT

REAR

SUBWOOFER

REAR

FRONT

50Hz

FULL

FULL

80Hz

80Hz

100Hz

100Hz

100Hz

150Hz

120Hz

150Hz

200Hz

CROSSOVER-EQUALIZER

20

19

bp HIGH PASS OUT FRONT R/L CONNECTORS

These connector ports provide the high-pass crossover stereo output signal to the front speaker amplifier. The crossover equalization frequency of this signal is selected by the FRONT crossover selector switch (item 19).

bq HIGH PASS OUT REAR R/L CONNECTORS

These connector ports provide the high-pass crossover stereo output signal to the rear speaker amplifier. The crossover equalization frequency of this signal is selected by the REAR crossover selector switch (item 18).

br SUBWOOFER OUT R/L CONNECTORS

Thses connector ports provide the subwoofer crossover ste- reo output signal to the subwoofer amplifier. The crossover equalization frequency of this signal is selected by the SUBWOOFER selector switch (item 20).

bs INPUT POWER CONNECTOR

This 4-pin connector accepts vehicle input power of 12Vdc and ground, along with the remote turnon, via the supplied harness.

bt REAR HIGH-PASS CROSSOVER SWITCH

This 4-position slide switch allows you to select the high-pass crossover point for the rear speakers at 150Hz, 100Hz, 80Hz or FULL (Full Range) during 2-way and 3-way operation. The frequencies above the setting of this control will be passed through the crossover to the HIGH PASS OUT REAR R/L jacks. Make this selection as appropriate for the woofer-to- midrange frequency of the speaker system being used.

-9-