Before you begin

Frequently asked questions

For answers to frequently asked questions (FAQ's), go to www.rcainfiniteradio.com.

General controls of RCA Wi-Fi Enabler (for RIR205)

Front view

Antenna

WPS MODE WPS WIRELESS POWER

PRESS

WiFi ENABLER

WAN

LAN

Back view

 

 

WAN port – connect to your

 

existing access point,

 

 

broadband modem or

 

Power

Ethernet router/hub/switch

adapter jack

 

 

RESET

WAN

LAN

POWER

• LAN port – if your modem or

 

Reset push

router/hub/switch has only

 

button

one LAN port and is

 

 

connected to your PC,

 

 

disconnect the Ethernet cable from the modem/router/hub/ switch and connect it to the Enabler's LAN port.

You can also connect it to your computer's Ethernet port to access the Enabler's web- administration page for troubleshooting purposes. Refer to page 31 for more information.

To install the Enabler:

The Enabler can be installed vertically or horizontally. Remove the standing brackets for horizontal installation. Rotate the antenna to improve signal reception.

 

 

WiFi ENABLER

WPS

WPS

PRESS

 

PRESS

WiFi ENABLER

 

To turn on the Wi-Fi Enabler:

The Enabler will turn on automatically when power is connected.

To check the RCA Wi-Fi Enabler's status by reading the LEDs (Lights):

Normally the POWER, WAN and WIRELESS LEDs will be on when the enabler is operating as a router.

The LAN LED will be on if there is an Ethernet cable connected from the LAN port on the Enabler to a computer.

The MODE LED will be off when the Enabler is operating as a Router.

The MODE LED will be on when the Enabler is operating as an (AP) Access Point.

To rescan the network configuration:

Your Wi-Fi Enabler comes preconfigured from the factory so normally no rescan should be necessary.

Press and hold the WPS key for 3 seconds. The MODE LED then starts blinking. This will indicate to the user that the unit is scanning the network to determine the correct mode for the new environment (i.e. either router or AP).

If during a scanning, the unit cannot determine the mode or needs more information (i.e. no response from the WAN connection, PPPOE, fixed IP address connection, etc) the unit will start flashing the MODE, WPS and WIRELESS LEDs.

To reset the Enabler:

If you are unable to connect the radio to the Wi-Fi enabler, press and hold the RESET for 10 seconds to reset the Wi-Fi enable back to factory defaults. After resetting the Wi-Fi enabler, try

connecting again.

13

Page 13
Image 13
Audiovox RIR200, RIR205 Front view, Back view, To install the Enabler, To turn on the Wi-Fi Enabler, To reset the Enabler

RIR200, RIR205 specifications

The Audiovox RIR205 and RIR200 are innovative products in the realm of consumer electronics, designed to elevate the audio experience for users. These models reflect Audiovox’s commitment to quality and technological advancement, making them suitable for a variety of applications.

The Audiovox RIR205 is particularly noteworthy for its wireless capabilities, allowing users to enjoy their favorite music or audio content without the constraints of cords. With a robust Bluetooth connection, the RIR205 can easily pair with a range of devices, including smartphones, tablets, and laptops. Users can experience high-quality audio streaming, thanks to advanced codecs that ensure minimal latency and optimal sound fidelity.

On the other hand, the RIR200 model features a slightly different approach, focusing on utilizing infrared technology for its wireless capabilities. This allows for a clear line-of-sight audio transmission, creating a unique experience for home theater systems or personal audio setups. The infrared technology provides a reliable connection, minimizing interference from other devices, which is often a concern in crowded wireless environments.

Both models are designed with user convenience in mind. They feature intuitive controls, enabling users to easily navigate through playlists, adjust volume levels, and switch tracks. The RIR205 also includes a built-in microphone, allowing for hands-free calls, which is a valuable feature for those who multitask.

In terms of sound performance, the Audiovox RIR205 and RIR200 incorporate powerful speakers designed to deliver clear, rich audio. The frequency response is finely tuned to ensure that bass, midrange, and treble frequencies are all well-represented, providing a balanced listening experience no matter the genre of music.

Battery life is another critical aspect of these models. The RIR205 boasts a long-lasting battery that can provide hours of playback on a single charge, making it a great option for users on the go. Meanwhile, the RIR200, with its efficient design, allows for extended use without the need for frequent recharging.

Moreover, both models flaunt a sleek and modern aesthetic, appealing to users who value design as much as functionality. They can seamlessly integrate into various home environments, enhancing not only the acoustic landscape but also the visual appeal of any setting.

In summary, the Audiovox RIR205 and RIR200 stand out in the crowded marketplace of audio devices due to their innovative technologies, user-friendly features, and commitment to delivering high-quality sound. Whether for personal enjoyment or enhancing a home entertainment system, these products deliver an impressive audio experience.