Audiovox SIR-CK1, SIR-CK2 manual Sirius Program Listening Options

TOP RETAINING	16-PIN SYSTEM
CLIP	CONNECTOR
SAT. (MAIN)
RF CONNECTOR	TERR. RF
	CONNECTOR
BOTTOM	BOTTOM
LEFT SLIDE	RIGHT
CLIP	SLIDE CLIP

6.Sirius Program Listening Options

The Shuttle and Cradle provide an audio output

signal in three manners:

1.When using CK1 or CK2 cradle, the audio signal can be routed through an audio cable which is applied to the auxiliary inputs of a radio or entertainment system.

2.When using the CK1 cradle, the audio signal can be transmitted to a car radio on one of four selectable FM frequencies. The audio signal can then be played through your car radio when the car radio is tuned to one of these frequencies.

3.Some listeners prefer to use a hard-wired FM transmitter. In this instance, when using the CK1 cradle, an optional FM Switching Box assembly

(Part No. 112C3159) is available and provides a hard-wired FM output when connected to the FM OUT connector on the left side of the cradle; the other end of the switching box plugs into the antenna jack of your radio. By using this assembly, and selecting the appropriate FM output frequency (88.1MHz, 88.3MHz, 88.5MHz or 88.7MHz) with the slide switch, the Sirius signal received at the SAT (MAIN) or TERR. cradle antenna input can be played through your car radio when tuned to one of these frequencies.

	FM OUT
	AUDIO OUT
	DC 12V
	FM FREQUENCY
	SELECT SLIDE
	SWITCH:
	88.1 MHz
SHUTTLE	88.3 MHz
	88.5 MHz
CRADLE
	88.7 MHz
CK1

-10-

128-6813

10 of 14