Audiovox SIR-HK1 manual 128-6814 6 of, Installing the Shuttle on the Cradle, Mounting the Antenna

Models: SIR-HK1

1 8
Download 8 pages 24.63 Kb
Page 6
Image 6
5.Installing the Shuttle on the Cradle

b.You can also place the antenna outside (on the roof structure), provided it is clear of any overhead obstructions.

NOTE: Because of the orbiting characteristics of the Sirius Satellites, the strength of the received signal may change over time. In most cases however, the signal should be available continuously. If you experience a loss of signal or audio, reposition the antenna inside the home or outside as necessary.

5.Installing the Shuttle on the Cradle

Place the Shuttle in the cradle so that the Shuttle connectors are lined up; use the SAT and TERR RF connectors as guides. Then gently press in on the bottom of the Shuttle to engage the connectors.

SAT. (MAIN)

TERR. RF

CONNECTOR

RF CONNECTOR

 

16-PIN SYSTEM CONNECTOR

7.Mounting the Antenna

The antenna should be placed on a relatively flat surface whenever possible. To mount the antenna:

a.Plug the antenna into the SAT. (MAIN) connector on the back of the cradle.

b.Place the antenna at the preferred location inside or outside the home.

-6-

128-6814

6 of 8

Page 6
Image 6
Audiovox SIR-HK1 manual 128-6814 6 of, Installing the Shuttle on the Cradle, Mounting the Antenna