Asante Technologies 5212 user manual Rack Mounting Desktop Placement, Equipment Rack Installation

Installation

Rack

Mounting/

Desktop

Placement

The IntraSwitch 5212 can be installed in most standard 19-inch equipment racks. It can also be placed on a horizontal surface with support capabilities of 11 pounds (5 kilograms).

Equipment Rack Installation

To install the IntraSwitch 5212 in an equipment rack:

▲Important! Disconnect all cables from the IntraSwitch 5212 before continuing.

1	Place the IntraSwitch 5212 on a stable, flat sur-
	face.
2	Locate a rack-mounting bracket (supplied) and
	place it over the mounting holes on one side of

the unit, as shown in Figure 2-1.

100 Mbps									IntraSwitch 5212
Max Util												Pwr
FDP
Data
Link
1	2	3	4	5	6	7	8	9	10	11	12	MII

10/100

1	2	3	4	5	6	7	8	9
									10	11	12

RS-232

Console

Figure 2-1	Mounting rack bracket on the IntraSwitch 5212
3	Insert the four screws (supplied) into the holes
	and tighten with a Phillips screwdriver.
4	Repeat the two previous steps for the unit’s
	other side.
5	Place the IntraSwitch 5212 in an equipment
	rack.
	▲ Important! Make sure the IntraSwitch
	5212 is supported until all four mounting
	screws for each bracket are installed.
6	Secure with mounting screws.
	The IntraSwitch 5212 is now installed in the rack.

Page 2-4