Asante Technologies 5212 user manual Enabling/Disabling Spanning Tree on a Single Port

Configuring Spanning Tree Parameters

Enabling/Disabling Spanning Tree on ALL Ports

To enable or disable Spanning Tree on all ports:

1

2

Open the Spanning Tree Parameter Menu by typing s on the Configuration Menu.

Type d to disable Spanning Tree on all ports; type e to enable Spanning Tree on all ports.

To cancel the request, type ctrl-c.

3	Type a on the Spanning Tree Parameters
	Menu to apply the configuration.

The Spanning Tree status is displayed at the top of the menu next to STP Status.

Enabling/Disabling Spanning Tree on a Single Port

To enable or disable Spanning Tree on an individual port:

1	Open the Spanning Tree Parameter Menu by
	typing s on the Configuration Menu.
2	Type c to open the Config STP Port Attributes
	Menu.

Figure 5-12 is an example of the Spanning

Tree Port Parameter Menu.

Figure 5-12 Spanning Tree Port Parameters Menu

Page 5-31