Asante Technologies 5212 user manual Provides a brief overview of each menu, Menu Item Description

Console Management

3	From this menu you can access configuration sub-
	menus by typing the command letter of the corre-
	sponding menu option (e.g., type a for the Configure
	System Administration Information Menu).
	Table 5-2 provides a brief overview of each menu
	item.

Table 5-2 Configuration Menu Items

Menu Item	Description
Config System	Displays and allows you to change the name,
Administration Information	location, and contact information for the
	IntraSwitch 5212.
	See "Configuring System Administration
	Information" on page 5-10.
Config TCP/IP Parameters	Displays and allows you to change the
	information needed to access the IntraSwitch
	5212 over the network (in-band management).
	See "Configuring TCP/IP Parameters" on page
	5-12.
Config Bootstrap Parameters	Displays and allows you to change the
	parameters used for downloading a new
	version of software for the IntraSwitch 5212.
	See "Configuring Bootstrap Parameters" on
	page 5-14.
Config SNMP Parameters	Displays and allows you to change the
	IntraSwitch 5212’s SNMP (Simple Network
	Management Protocol) parameters; such as,
	read/write settings, trap authentication, and
	trap receivers.
	See "Configuring SNMP Parameters" on page
	5-17.
Config Port Parameters	Allows you to manually configure each of the
	IntraSwitch 5212’s ports for speed, connection,
	link mode, and auto-negotiation.
	For more information, see "Configuring Port
	Parameters" on page 5-21.
Config RMON Parameters	Displays and allows you to change the
	IntraSwitch 5212’s RMON parameters.
	See "Configuring RMON Parameters" on page
	5-26.

Page 5-8