Asante Technologies 5212 user manual Setting Telnet Idle Time Out

Setting Telnet Idle Time Out

Setting Telnet Idle Time Out

This option sets the Telnet idle time-out period.

If a Telnet connection to the IntraSwitch 5212 remains idle for the number of specified time-out minutes, the remote Telnet connection to the IntraSwitch 5212 is automatically disabled.

To set the Telnet Idle Time Out period:

1 Type t from the Configuration Menu.

The following two lines appear at the bottom of the screen.

Figure 5-13 Set TelNet Idle Time Out command line

	The current idle time is displayed in minutes.
2	Enter the number of minutes for the time-out
	period at the prompt.
	Δ	Note: The default, recommended time-out
		period is 20 minutes.
		To exit this option without making any
		changes to the current idle time-out
		period, press ctrl-c.
3 Press Return.
	The IntraSwitch 5212’s Telnet idle time-out set-
	ting is configured.
	▲	Important! Only one Telnet or HTTP
		Management session should be active at a
		time. Please close sessions when finished.

Page 5-33