Asante Technologies 5212 user manual Press Return

Console Management

3

4

5

Select the port number you want to enable or disable Spanning Tree on by typing l on the Port Parameter Menu and entering the port number at the prompt.

ΔNote: The 10/100TX port is port num- ber 13, the installed Asanté MII module is port number 14.

Press Return.

Type e to enable Spanning Tree on the port; type d to disable Spanning Tree on the port.

6	Type q to exit this menu and return to the
	Spanning Tree Parameter Menu.
7	Type a to apply the changes.

▲Important! The change will not take effect until Apply is selected from the Spanning Tree Parameter Menu.

Page 5-32