Asante Technologies 5212 user manual Troubleshooting, Link LED for the port goes off

Troubleshooting

LED Error Type/Cause

Solution (Options or Steps)

Max Util (maximum utilization) LED for the port never blinks (steady light)

❏Port is overloaded.

❏Check the port statistics for the amount of traffic, errors, etc. being transmitted on the port.

Link LED for the port goes off

❏Cable connection is broken.

❏Network station to which the port is connected has been pow- ered off.

❏Wrong type of cable is con- nected between the port and the equipment.

❏Make sure connectors are seated correctly in the equipment at both ends of the cable. Check the continuity of the wires in the cable and the pin assignments on the RJ-45 connectors.

❏Make sure the station to which the port is connected is plugged in and powered on.

❏Make sure the correct type of cable is connected to the port (refer to “Connecting to the Net- work” on "Connecting to the Net- work" on page 2-9).

Page A-2