Asante Technologies 5212 Connecting Power, Connecting the power cord to the IntraSwitch

Installation

Connecting Power

To connect power to the IntraSwitch 5212:

1	Plug one end of the supplied power cord into
	the power connector on the back of the

IntraSwitch 5212.

MII (Port 14)

Redundant Power Supply

Power Cord

Power Switch

Figure 2-5 Connecting the power cord to the IntraSwitch 5212

2	Plug the other end of the power cord into a
	grounded AC outlet.

3

4

ΔNote: For more information about power and environmental requirements, see Appendix C,“Technical Specifications.”

Turn the power switch to the “on” position.

Make sure the IntraSwitch 5212’s front panel LEDs blink and the POWER LED lights and remains on.

▲Important! If the power does not come on, refer to Appendix A,“Troubleshooting.”

Turn the IntraSwitch 5212’s power off.

The IntraSwitch 5212 is ready to be connected to the network.

Page 2-8