Asante Technologies 5212 Resetting Eeprom to Default, Reset Eeprom to Default command line

Configuration Menu

Resetting EEPROM to Default

This option resets the IntraSwitch 5212’s EEPROM values to their factory default settings.

▲Important! This procedure reverts all informa- tion to the factory default settings except for the IntraSwitch 5212’s IP address, subnet mask, and default gateway.

See "Factory Defaults" on page 1-10 for a list of all the switch’s factory default settings.

To reset the EEPROM:

1 Type e from the Configuration Menu.

The following command line appears at the bot- tom of the Configuration Menu.

Figure 5-15 Reset EEPROM to Default command line

2	Type y to reset the EEPROM to default or n to
	cancel the reset.
3	Reset the IntraSwitch 5212 by manually turning
	its power off and then on again.

The IntraSwitch 5212’s EEPROM is reset to its factory default settings.

Page 5-35