Asante Technologies 5212 user manual Console Management Adding a Trap Receiver Entry

Console Management

ΔNote: If there is an entry in the trap receiver table of an IP address for any component connected to the 5212 IntraSwitch, other traps will be gener- ated. These include traps for cold starts (when power is cycled off and on or the plug is unplugged and reconnected), link ups (when a component is plugged into a port or a link is established), and link downs (when you unplug a component from a port or lose a link).

Adding a Trap Receiver Entry

Trap receivers are the management stations designated to receive traps from the IntraSwitch 5212 when they occur.

ΔNote: The maximum number of trap receiv- ers that can be added is four.

To add a trap receiver entry:

1	Open the SNMP Parameter Menu by typing n
	in the Configuration Menu.

2

3

4

Type a to add an SNMP trap receiver entry.

Type the IP address of the network manage- ment station you want to receive traps.

To cancel a selected option, press ctrl-cat the command prompt.

Press Return.

The trap receiver entry is added.

Deleting a Trap Receiver Entry

To delete a trap receiver entry:

1	Open the SNMP Parameter Menu by typing n
	on the Configuration Menu.

Page 5-20