Asante Technologies 5212 user manual Configuring TCP/IP Parameters, TCP/IP Parameter Settings

Console Management

Configuring TCP/IP Parameters

This menu displays and allows you to change the information needed to access the IntraSwitch 5212 over the network (in- band management).

To access the TCP/IP Parameter Menu, type i from the

Configuration Menu. The following menu appears.

Current Settings

Figure 5-5 TCP/IP Parameter Menu

ΔNote: By default, each parameter is set to 0.0.0.0.

Current Settings

Table 5-4 explains each setting on the TCP/IP Parameter

Menu.

For information on using the menu, see:

❏"Changing TCP/IP Information" on page 5-13

Table 5-4 TCP/IP Parameter Settings

Setting	Description
Switch IP Address	The IntraSwitch’s IP (Internet Protocol)
	address.
Switch Subnet Mask	The subnet mask of the network on which the
	IntraSwitch is located.
Switch Default	The address of the IntraSwitch’s default
Gateway	gateway.

Page 5-12