Asante Technologies 5212 user manual Configuring Spanning Tree Parameters

Configuring Spanning Tree Parameters

Configuring Spanning Tree Parameters

This menu allows you to view the IntraSwitch 5212’s Spanning Tree parameters. It also allows you to enable or disable Spanning Tree on all of the switch’s ports or on a single port.

By default, the IntraSwitch 5212 is shipped with Spanning Tree enabled on all ports.

▲Important! You should be familiar with the IEEE 802.1d specification before attempting to change these Spanning Tree parameters.

To access the Spanning Tree Parameter Menu, type s from the Configuration Menu. The following menu appears.

Current Settings; these values cannot be changed

Figure 5-9 Spanning Tree Parameters Menu

Current Settings

Table 5-9 explains each setting on the Spanning Tree

Parameter Menu.

For information on using the menu, see:

❏"Enabling/Disabling Spanning Tree on ALL Ports" on page 5-31

❏"Enabling/Disabling Spanning Tree on a Sin- gle Port" on page 5-31

Page 5-29