Asante Technologies 5212 Local Management Interface, Accessing a Submenu Exiting a, Main Menu

Local

Management

Interface

Accessing a Submenu

Exiting a

Submenu

Local Management Interface

After you connect to the IntraSwitch 5212’s Local Management Interface using either out-of-band Console or in-band Telnet connection as described in Chapter 4, the Main Menu appears, as shown in Figure 5-1.

Main Menu

Figure 5-1 Local Management Interface Main Menu

From the Main Menu, you can access three submenus:

❏"General Information Menu" on page 5-6

❏"Configuration Menu" on page 5-7

❏"Statistics Menu" on page 5-37

If you are using Telnet, a fourth option will be available — Close Connection. This option closes your remote connection to the IntraSwitch’s Local Management Interface.

To access a submenu, type the command letter of the corresponding option (e.g., type g for General Information).

To exit a submenu, type q. To exit a command line (e.g., Set Console Password in the Configuration Menu), press ctrl-c.

ΔNote: For a one-page map of the Main Menu and its submenus, refer to Appendix D,“Con- sole Management Menu.”

Page 5-5