
Configuring SNMP Parameters
Configuring SNMP Parameters
This menu controls the IntraSwitch 5212’s SNMP (Simple Network Management Protocol) parameters.
With these parameters, you can configure the IntraSwitch 5212’s read and write community strings, set the IntraSwitch 5212 to generate authentication traps, and determine which management stations on your network can receive traps.
To access the SNMP Parameter Menu, type n from the Configuration Menu.The following menu appears.
Current Settings
Figure 5-7 SNMP Parameter Menu
Current Settings
Table
For information on using the menu, see:
❏"Changing Community Strings" on page
❏"Enabling Traps" on page
❏"Adding a Trap Receiver Entry" on page
❏"Deleting a Trap Receiver Entry" on page
Page