A typical channel display will appear as shown below.
CHANNEL
NAME PRESET GROUP INDICATOR
Confirmation Tone(s) Function
There are two basic functions of this feature; the Command Confirmation Tone, the Station
ARTIST
NAME
SONG TITLE
SR1
a description of each of these functions:
1. Command Confirmation Tone - This function utilizes a single |
High Tone signal that is heard each time a button is pressed to |
confirm that the command was executed. This tone is imple- |
mented each time the user presses the Power, Mute, Scan, |
Shift or Directional (WX) button(s) as well as for each of the |
CHANNEL |
|
|
NUMBER | CATEGORY (only in Category Mode) | PRESET CHANNEL |
| ||
|
|
Figure 5. Sample SIRIUS® Display
USING THE UP/DOWN BUTTONS
This section describes two ways the Down (W) and Up (X) directional buttons are used to select an SIRIUS® channel. Proceed as follows:
1.To advance one channel at a time in the chosen direction (Up or
Down), momentarily press and release either directional button (WX) until a desired channel is reached.
2. To advance rapidly in the chosen direction (Up or Down), press and hold either directional button (WX). Release the directional button when a desired channel is reached.
numbered buttons. |
2. Station |
utilizes two High Tone signals that are heard each time the user |
programs a |
into memory (Refer to Presetting A Desired Channel below) a |
High Tone will be heard as the selected number button is |
pressed and held. A second High Tone Signal is heard con- |
firming that the |
the second tone that the user can release the button (approxi- |
mately two seconds). |
DIRECTLY ACCESSING A CHANNEL
This section describes the procedure used to directly access a specific channel, this is different then making direct access in Category mode
MOMENTARY PRESS: ADVANCE DOWNWARD ONE CHANNEL AT A TIME
PRESS AND HOLD: CONTINUOUS ADVANCE DOWNWARD
MOMENTARY PRESS: ADVANCE UPWARD ONE CHANNEL AT A TIME
PRESS AND HOLD:
CONTINUOUS ADVANCE UPWARD
(see SELECTING CHANNEL CATEGORIES)
1. | With the system powered up, momentarily press the Shift (SFT) |
| button causing the first channel number in the current category to |
| flash for 5 seconds. The flashing number indicates the Channel |
2. | number in Channel mode. |
While the number is flashing, use the number buttons on the | |
| keypad to enter the channel desired. The selected channel |
Figure 6. Using the UP / Down Buttons
NOTE: When an invalid (no broadcast) channel is encountered, the channel is automatically skipped.
6
number will flash for 5 seconds and then remain steady. |
The flashing number indicates the value of the Category in |
Category mode.
NOTE: If the selected channel is not available within the band, a “In- valid Channel” message will appear on the display and the system will remain tuned to the previous channel.
128-6374A
6 of 12