SUBSCRIBING HANDSETTO BASE STATION
• After a few second, “H ?” will be shown on LCD.
Note : The handset will not automatically link with another Base that it is already subscribed
to. The user must select an existing Base station or subscribe to a new one.
SELECTING BASE STATION TO BE USED
When a handset is subscribed to several different base stations, the user selects which should be used as follows:
•Press scroll keys 5/6(6) to select “ADVANCED”, then press * to confirm.
•Press scroll keys 5/6(6) again to select “CHOOSE”, then press YES (3) to confirm.
•Enter the PIN code then press YES (3) to confirm
•Press scroll keys 5/6(6) to select a base numbers, press YES (3) to confirm.
•Handset will show “Please wait” then “SEARCHING. . . “ is displayed.
•“H x” be shown on LCD if the base selection is successful. Else, “H ?” will be shown for fail selection.
Note : If the handset is not subscribed to a base station, then selecting “CHOOSE” will cause the warning “NO BASE” to be displayed for 3 seconds, before reverting to the menu.
If the handset is subscribed to one base station only, then the function will work as for a
Deleting all Handsets from a Base Station.
To remove subscribed handsets (H3, H4) from a Base station, press and hold the PAGE button until the LED flashes twice and stops (flashing) (about 20 seconds). This will cause the Base to delete the subscriptions of all additional handsets (H3, H4). It is not possible to remove handset subscriptions individually.
E - 11
9038_1_ib_e.p65 | 11 | 10/31/03, 12:13 PM |