1.Using the template provided (we’ll assume you’ve already made all the necessary checks and you’ve not going to cut through the door release mechanism), mark the speaker open- ing on the door panel. Now carefully cut the opening and drill the required holes.
NOTE: Whether you’re using an existing hole, or have just cut or modified an existing opening as described above, you are now ready for speaker installation.
2.Place the speaker into the opening and check for proper fit. Remove the speaker and replace the paper door liner previously removed.
Selecting the Speaker Location
1.This is a good speaker location , but to use it, you’ll have to enlarge the existing hole
2.Check for free window crank movement
3.Check for possible braces behind selected area with window down and up
4.This is a poor location for a speaker installation; it is too low and behind driver’s hearing area
Speaker Mounting
Let’s assume you didn’t find a suitable opening, but you want to install the speakers in the doors. This usually means you will have to cut a speaker opening in the
If you intend to tackle the job yourself, break out your best metal- cutting tools (no torches please); use nibblers, saws or heavy snips. You’ll need a file too. Prepare the opening as follows:
Cutting Door Padding
1.Use a sharp knife to cut through padding to expose speaker hole
2.Replace door panel and paper liner
