Piercing Speaker Mounting Holes
1.Opening
2.Speaker
3.Pierce the speaker mounting holes
Using an Existing Hole
1.Speaker
2.Drill
3.Drill the required speaker mounting holes
Enlarging or Cutting a New Hole
1.Enlarge or cut new hole per template
2.Tape
3.Template
4.Metal cutting saw
5.File hole smooth after cutting
Cutting Door Padding and Piercing Speaker Mount- ing Holes
After routing the speaker wires, perform the final installation as follows:
1.Replace door panel, window crank, etc. Press against door panel to locate speaker hole. Then, using a sharp knife or box cutter, cut out opening in padded door panel.
2.Replace speaker in opening and pierce the three or four speaker mounting holes. Remove speaker.
