AM/FM TUNER OPERATION
Tuner TFT Display | Switch to Radio Tuner source |
UV7i
remote control once (short press) or push in on the joystick
1.Current Radio Band Indicator
2.Radio Frequency Indicator
3.Clock
4.Stereo Broadcasting Indicator
5.Local Indicator
6.Preset Radio Stations
7.Playing Mode
8.User Defined Equalizer Level
9.Loud Setting Indicator
10.Current Preset Station Indicator
Tuner LCD Display
1 | 2 | 3 | 4 | 5 |
1.Current Radio Band Indicator
2.Radio Frequency Indicator
3.Current Preset Station Indicator
4.Stereo Broadcasting Indicator
5.Strong Local Signal Broadcasting Indicator
Press the SRC button (15) on the front panel or remote control (8) to switch to the RADIO TUNER source. The Tuner TFT or LCD display appears.
Select FM/AM Band
Press the BAND button (14) on the front panel or the remote control (20) to change between the following bands: FM1, FM2, FM3, AM1, and AM2.
Seek Tuning
Press the >> button (19) on remote control or the > button on the joystick (17) to seek the next station higher.
Press the << button (17) on the remote control or the < button on the joystick (16) to seek the next station lower.
Manual Tuning
Press the /\ or V buttons (18, 19) on the joystick to increase or decrease the tuning frequency one step.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored stations
Storing a Station
1.Select a band (if needed), then select a station.
2.Hold a preset button
Recalling a Station
1.Select a band (if needed).
2.Press a preset button
Auto Store (AS)/Preview Scan
Automatic Storing of Preset Stations
To select six strong stations and store them in the current band:
1.Select a band (if needed).
2.Press the AS button (26) on the unit to activate the Auto Store function.
The new stations replace stations already stored in that band.
Preview Scan
Scan the AM or FM band for a preview of available stations in your particular area. Press the play/pause button on the
once (short press). Press again to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong radio signal are played. To activate the Local function, press and hold the LO/DX button (6) on the front panel while the yellow volume bar IS NOT displayed. Press and hold LO/ DX again to turn Local off. When the Local function is active, the “LOC” indicator appears lit on the LCD or TFT screen.
14
