UV7i
| Table 13: Troubleshooting | |
|
|
|
Problem | Cause | Corrective Action |
|
|
|
|
|
|
Disc does not play back | Disc is warped or scratched | Use disc in good condition |
|
|
|
| Disc is dirty or wet | Clean disc with soft cloth |
|
|
|
| Laser pickup is dirty | Clean laser pickup with cleaning disc |
|
|
|
| Incompatible disc is used | Use compatible disc |
|
|
|
| Disc rating exceeds Parental Lock rating limit | Change Parental Lock settings to lower restriction |
|
|
|
| Disc region code is not compatible with unit | Use disc with proper region code |
|
|
|
| Disc is inserted upside down | Insert disc with label side up |
|
|
|
Image blurred, distorted, or dark | Disc is illegally copied | Use original disc |
|
|
|
PBC cannot be used during VCD playback | PCB is not available on the disc |
|
|
|
|
No repeat or searching while playing VCD | PCB is on | Turn PCB off |
|
|
|
MP3 |
|
|
|
|
|
Interruption occurred during playback | Disc is dirty or scratched | Clean disc or replace |
|
|
|
| File is damaged/bad recording | Recreate disc with good files |
|
|
|
Incorrect playback message displayed | Message is longer than LCD can display |
|
|
|
|
IPOD |
|
|
|
|
|
iPod source not available | Incorrect cable connections | Check jLink II cables |
|
|
|
Cannot see video and photo media on TFT screen | Wrong iPod Video Settings | Change iPod video settings to TV Out = On |
|
| Check yellow RCA video input cable |
Error Messages |
|
|
| Table 14: Error Messages | |
|
|
|
Message Displayed | Cause | Corrective Action |
|
|
|
|
|
|
Loading | Disc is being read |
|
|
|
|
No Disc | Disc is dirty | Clean disc with soft cloth |
|
|
|
| Disc is upside down | Insert disc with label side up |
|
|
|
| Disc not present in loading compartment | Insert disc |
|
|
|
Bad Disc | Disc is dirty | Clean disc with soft cloth |
|
|
|
| Disc is upside down | Insert disc with label side up |
|
|
|
Unknown disc | Disc format is not compatible with this unit |
|
|
|
|
Region Error | DVD is not compatible with region code of unit |
|
|
|
|
Error | illegal mechanism operation | Press EJECT key for 5 seconds to reset loading mechanism |
|
|
|
Care and Maintenance
1.Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non- neutral detergent (such as alcohol) may result in scratching or discoloration.
2.Do not get water or cleaning fluids on the unit.
3.If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
4.Never insert anything other than a 5” (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects.
5.Do not attempt to use a 3” (8 cm)
23
