SETTING THE TIME
NOTE: TheVE1020 must be turned off (except when SETTING THE PRESETS).
1)Press the SET button and the minutes will flash.
2)Use the CH UP/DOWN buttons to set the minutes.
3)Press the SEEK buttons to toggle between the hour and minutes.
4)Use the CH UP/DOWN buttons to set the hour(Check AM/PM indicator).
5)Press the ON/OFF button to return to the time display.
SETTING and ACTIVATING the ALARM
NOTE: the VE1020 must be turned ″OFF″ when performing the following procedure.
1)Press the SET button (1) twice and VE1020 is in alarm mode indicated by ”alarm”. A present time will be displayed with the minutes portion blinking. (Alarm ACTIVATED mode, Alarm indicator ″ALM″ on).
NOTE: If a series of dashes appear
2)Press the CH UP/DOWN buttons to set the desired hour/minute. When setting the alarm, check the AM/PM indicator to assure the proper setting.
3)Press the SEEK buttons to toggle between the hours and minutes.
4)Press the ON/OFF button. The alarm is now set and activated.
DEACTIVATING THE ALARM
1)With the power off, press the SET button twice to enter the alarm mode.
2)Press the P3 button once. The set time disappear from the VFD and a series of dashes will appear.
3)Press the ON/OFF button. The alarm is now deactivated.
NOTE: The set times will be stored in memory and can be reactivated whenever desired by performing steps 1) - 3) of the DEACTIVATING THE ALARM procedure above.
SETTING THE ALARM TONES
NOTE: Alarm must be in the ″Activated″ mode and volume turned up to hear tones.
1)Press the SET button Twice (power off).
2)Press the P4 button once to hear the alarm tone.
3)Pressing CH UP/DOWN button will select a different tone.
4)Press the ENTER button (small round button between arrow buttons) to select the tone.
5)When the alarm sounds, press the ON/OFF button to turn it off.
-15 -
