4. SKIP/SEARCH BUTTON
This button selects between SKIP and SEARCH mode. In “SKIP mode” the TV only stops on channels that are programmed into memory when the CHAN- NEL UP/DOWN buttons are used. When SKIP mode is off, the TV is in search mode and will stop on all active channels.
a. Press this button until SKIP MODE ON is displayed on the screen. Then when the channel up and down keys are used, the TV will stop only on the TV channels stored in memory.
b. Press this button until SKIP MODE OFF is displayed on the screen. Then
all the TV channels will be shown using the channel up and down keys. 5. TV/CATV
Press this button to select the regular 69 channel broadcast TV and the 125 Channel Cable TV (Standard Cable, HRC Cable, and IRC Cable) with the on screen display.
6. MUTE
Press this button to cut off the sound, and the screen will display the volume adjustment bar for six seconds to indicate that the sound has been turned off. Press this button again to restore sound to the sound level set previously. You can also release the mute feature by pressing VOLUME UP/DOWN.
7.CHANNEL UP/DOWN
Use these buttons to advance to the next higher or lower channel.
8.VOLUME UP/DOWN
Use these buttons to raise or lower the sound level. They are also used to make picture adjustments in picture select mode.
9. AUTO MEMORY
Pressing AUTO PROG, the TV’s tuner will scan the entire range of the se- lected band and memorize all the active channels in your area.
10. PICTURE SELECT Each time this button is pressed, the on screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHT- NESS, COLOR and TINT. Once the desired adjustment bar is displayed, use
7
