Audiovox XMB10 manual 128-7546 7 of, Battery Installation, Cabling Interconnections

COVER LATCHES

1.Battery Installation

Your Boom Box can operate independently of AC power by installing 8 C-Cell batteries as follows:

NOTE: The batteries are bypassed automatically whenever the supplied AC Adapter is plugged into the DC 12V jack on the back panel.

BATTERY	BOTTOM OF
	BOOM BOX
COMPARTMENT
COVER
NEGATIVE	POSITIVE
BATTERY
COMPARTMENT
(COVER REMOVED)
POSITIVE	NEGATIVE

1.Turn the Boom Box upside down to access the battery compartment.

2.Push the battery cover latches forward and flip up the battery compartment cover to the open position.

3.Insert eight (8) C-Cell batteries observing battery polarity as shown; then close the cover.

2.Cabling Interconnections

You can begin to enjoy Xpress XM® Satellite Radio as soon as the Receiver and Boom Box Kit installation are complete. Set up your Audiovox XMB10 by following theinterconnect diagram.

3.Installing the Receiver in the XMB10 Install the receiver as follows:

IMPORTANT: Make sure boom box power is off before installing and removing the Xpress Receiver.

a.Press the EJECT button at the top of the XMB10; the spring-loaded mounting plate will tilt forward.

RECEIVER	EJECTBUTTON	MOUNTING
COMPARTMENT		PLATE
		DETENT
MOUNTING
PLATE
		Xpress
CONNECTOR		RECEIVER
GUIDEPIN		CONNECTOR

-7-

128-7546

7 of 16