Primera Technology LX400 user manual Installing the PC Software, Installing the MAC Software

TOC INDEX

Section 2: Hardware and Software Setup

A. INSTALLING THE PC SOFTWARE

The Installer Disc has a menu that will guide you through the process of setting up your duplicator. Please refer to the following for more information on each step:

1.Place the Installer CD in your CDRom Drive. The Installer application should automatically launch in a few moments. If it does, proceed to Step 2. If it does not automatically launch, follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc.

•Double-click Installer.exe

2.In the Installer Application, click the Standard Install button. The on screen instructions will guide you step-by- step through the installation process.

B.INSTALLING THE MAC SOFTWARE

Please note that your user account must have administrative rights to properly install a new printer. You can check with your system administrator or check with Apple support to confirm whether or not your account has administrative rights.

Install the software as follows:

a.Insert the Installation CD-ROM in your system's CD-ROM drive.

b.Double-click the CD-ROM icon.

c.Double-click on the Color Label Installer.mpkg file icon. Follow the on-screen instructions.

d.The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations.

e.Once the installation has completed, click Quit.

You have successfully installed all the necessary software! Section C below will describe how to connect the Printer to your Mac.

Hardware and Software Settings 5