TOC

INDEX

5.Place the leading edge of the label stock between the throat guide and the side of the printer.

Throat Guide

6.Feed the label stock further into the printer until it senses the label and automatically feeds it through the printer. If the printer fails to feed the label stock, press the Feed but- ton on the front panel while continuing to guide the label stock into the printer.

F.ADJUSTING THE LABEL STOCK TOF (TOP OF FORM) SENSOR

If you are using label stock other than standard square / rectangular die cut labels such as circular die-cut labels or through-hole stock use the instructions below to adjust the label stock TOF sensor.

in.

0.5

1.0

1.5

2.0

mm

12.7

25.4

38.1

50.8

Label Stock Sensor Bar

10Hardware and Software Settings

Page 14
Image 14
Primera Technology LX400 user manual Adjusting the Label Stock TOF TOP of Form Sensor