Sensor Type | Primera Technology LX400 specification

TOC

INDEX

Sensor Type

Sensor Type refers to the method the printer will use to detect the print starting position for each label. If you are using standard die-cut labels or Through-hole label material where a hole is punched through each label for alignment purposes use the Through-hole/Die-Cutsetting. Use Reflective for black stripe sensing label material where a pre-printed line on the back of the label stock indicates the break between labels. If you have continuous stock with no die-cut, reflective mark or holes set the sensor type to Continuous Feed. This will turn off the stock sensor.

Output Mode

Do not present (use with Rewinder). The label stock does not move after the last label is printed. This means that part of the last label printed is still in the printer. This should be used only if you have a label rewinder attached.

Present (Default). This setting will cause the printer to feed the last label printed forward so that it and the previously printed labels can be torn off using the tear bar. This will occur only if there are no other print jobs in queue.

Cut (using optional cutter). Use this setting only if you have the label cutter attachment (Primera Part # 074263)

Printing Using a Macintosh 43

Image 47

Primera Technology LX400 user manual Sensor Type

Contents

All rights reserved Color Label Printer Printing History Table of Contents Interactive Feature Choosing a Good Location Thank YOU… Starter roll of high gloss label stock Unpacking and Inspection Identifying the Parts Minimum Macintosh Specifications Computer SpecificationsMinimum PC Specifications Installing the MAC Software Installing the PC Software If you are using a PC Connecting PowerConnecting the USB Cable / Installing the Printer Driver If you are using Macintosh Installing Label Stock Stock Guide Rollers Adjusting the Label Stock TOF TOP of Form Sensor Through Hole Labels Circular Labels Using FAN-FOLD Label Stock For Macintosh and PC Installing the INK CartridgeIf using a PC If using a Mac Aligning the INK Cartridge TOC Index Creating a label Using Nicelabel TOC Index TOC Index TOC Index TOC Index TOC Index Creating Barcodes in Nicelabel RSS TOC Index To find Driver Settings Printer Driver Settings PC Portrait Landscape Paper Size Ink Saturation Color Matching Clean/Purge Clean/Change Cartridge & Check Ink Levels Details/Print Counter Change Cartridge Enable Bi-di Printing Output Mode Cut Position Top of Form TOF Printing on a MAC from Adobe Illustrator Printing Using a Macintosh TOC Index TOC Index TOC Index TOC Index Printing from Other Applications Creating Barcodes on a MAC Printer Driver Settings MAC Color Type Intensity Clean Cartridge Config. Utility Label Offsets Tear Off Position Sensor Type Image is Vertically Offset Solving Registration Problems Image is printing horizontally offset TOC Index Creating a Full Bleed Print Clearing a Label JAM Cleaning the Printer Source Location Cleaning the INK CartridgeTechnical Support Label and Roll Specifications Index Roll Specifications Power Requirements Print ResolutionsAccessories Indicator Lights Index