Primera Technology LX400 user manual Index, Roll Specifications

TOC			INDEX
		Max	Min
	Distance from edge of	1.90" (48.3mm)	0.20" (5.1mm)
	media to edge of
	thru-hole
	Reflective/Black	Equal to distance	0.10" (2.5mm)
	Mark Width*	between labels
	Max Outer Diameter (OD)	5.0"(127mm)	N/A
	Inner Core Diameter (ID)	see roll specifications below
	Stock Thickness	.006”	N/A
		(152 micron)
	Distance from edge of	Printer driver assumes 2 mm gap.
	media to edge of label	However, this is adjustable via the
		left margin offset.

*The Reflective/Black Mark should be opaque to infared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.

Roll Specifications

Label Side Out

Roll O.D. Label Stock

2” 5”

Core I.D.

Core O.D.

Notes:

1.Label height <1.5” requires a 2.00” I.D. x 3.00” O.D. core. Label height >1.5” requires a 2.00” I.D. x 2.25” O.D. core.

2.Turret glue or 1/2”-wide 3M 928 double-sided removable tape must be used to attach stock to core. Removable tape must be positioned across full width of core. Other types of tape are not allowed.

3.End face of liner must align with end of core on both sides within 0.030”. (Core width should be the same as liner width.)

4.Masking tape or equivalent may be used to secure label stock to outside of roll.

Label and Roll Specifications 51