TOC | INDEX |
C. CONNECTING POWER
1.Locate the power adapter supplied with your printer.
2.Place one end of the adapter
cord into the power port on
the rear panel of the printer.
3. Plug the power cord of the adapter into an available
wall outlet or surge protect-
ing power strip. Once the power cord is connected, the printer can be switched on and off using the power switch.
D. CONNECTING THE USB CABLE / INSTALLING THE PRINTER DRIVER
Connect the printer to your PC or Mac with your beige USB 2.0 Cable.
If you are using a PC:
If you are using a PC, after a few moments, Windows will tell you it has found new hardware and is looking for software to install it.
6Hardware and Software Settings
