CONFIGURATIONS

BLOCK DIAGRAM

CONTROLS PANEL

4

B CHANNELS (Level)

It adjusts the amplifier B channels input sensitivity and sets its output level.

8

F1 SLOPE

It permits to choose LO-PASS filter slope between 12dB/Oct. (stereo) and 24dB/Oct. (mono, L+R).

5

A CHANNELS (Stereo/Mono)

It permits to configure A channels outputs signal as stereo or mono.

6

B CHANNELS (Stereo/Mono)

It permits to configure B channels outputs signal as stereo or mono.

7

SUBSONIC

It permits to eliminate subsonic frequencies; these sounds cannot be heard by human ears but cause useless and damaging stress to amplifier and speakers. Subsonic filter can be bypassed (BYPASS) and it is pre-set at 20 Hz. Its cut-off frequency can be adjusted between 16 and 32 Hz through 4 Hz steps; this occurs by replacing the special resistors located into a socket which can be reached through the setting panel in the amplifier bottom.

9

F1

It permits to adjust LO-PASS filter cut-off frequency between 40 Hz and 5 kHz.

10

F2

It permits to adjust 12dB/Oct. HI-PASS filter cut-off frequency between 40 Hz and 5 kHz.

11

SAFETY (red LED)

It indicates that the amplifier protection circuits are on. In order for the amplifier to work again, you need to switch the system off and then on after 10 seconds at least. We recommend to check all connections before switching the amplifier on again.

If LED stays on, please contact Audison authorised after sale centres.

16

9

Page 9
Image 9
Audison LRX 4.300 manual Block Diagram, F1 Slope, Channels Stereo/Mono, Subsonic, Safety red LED

LRX 4.300 specifications

The Audison LRX 4.300 is a powerful and versatile four-channel amplifier designed for high-performance car audio systems. Its robust build and advanced technologies make it a favorite among audiophiles looking to elevate their listening experience on the road.

One of the standout features of the LRX 4.300 is its superior power output. Delivering an impressive 4 x 75 Watts RMS at 4 ohms, this amplifier is capable of driving the most demanding speakers while maintaining clarity and dynamic range. Whether you're powering a full range of components or simply looking to enhance your existing setup, the LRX 4.300 delivers ample power along with exceptional sound quality.

The amplifier incorporates Class AB technology, which is known for offering a warm and detailed sound. This class combines the efficiency of Class D with the high fidelity of traditional Class A amplifiers, resulting in low distortion and high linearity. This means that whether you're listening to soft jazz or heavy metal, the LRX 4.300 preserves the nuances, ensuring a rich listening experience.

Another notable feature is its flexibility in channel configuration. The LRX 4.300 can be used in various setups: as a full four-channel amplifier, or two channels driving high-frequency components while bridging the other two channels for use with a subwoofer. This versatility allows users to customize their systems based on individual preferences and requirements.

Advanced technologies also play a significant role in this amplifier's performance. The built-in crossover system offers both high-pass and low-pass filters that enable precise tuning of each driver. This ensures that each component receives the right frequencies, optimizing overall sound quality and avoiding distortion.

Additionally, the LRX 4.300 features an impressive signal-to-noise ratio, which helps to minimize unwanted noise, further enhancing the clarity of the audio. Its compact design allows for easy installation in various vehicle types, without compromising on available space.

In conclusion, the Audison LRX 4.300 stands out in the competitive car amplifier market due to its powerful output, excellent sound quality, and versatile configurations. Whether for casual listening or serious sound enthusiasts, this amplifier meets the demands of any audio system, ensuring an immersive sound experience on the go.