11
Step 12
Side Burner Igniter Wire Connection
The Side Burner Igniter Wire is pre-installed and connec t-
ed to the Ignition Box. Attach the wire to the Side Burner
electrode by sliding the wire connector onto the electrode
terminal.
Underside view of
Side Table/Side Burner
Note:
Shown without Regul ator
Hose for clarity.
Valve
Step 11
Side Burner Valve Assembly
NOTE: Side Burner Valve is already attached to the regulator hose.
A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve ste m out through the hole
in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and inser t the nozzle into
the opening in the burner tube.
B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded Valve
bracket holes. Install the top bolt first by twisting the valve/brac ket to align only the top holes. Do not tighten completely.
Next, twist the valve/bracket to align the bottom holes and install the se cond bolt. Tighten both.
B
A
5/32 x .31” Bolt
2 pc Top First
Bottom Second
To avoid possible damage to grill, DO NOT ATTEMPT TO LIFT GRILL BY THE SID E TABLES
CAUTION