5
Assembly Instructions
Step 1
Caster Assembly
Lay Cabinet Bottom Panel upside down, so that the flat surface is on the floor. Assembl e Fixed Casters to the LEFT Side
(the side closest to the cutouts) of Cabinet Bottom Panel and Swivel Lock Casters to the R IGHT Side of Cabinet Bottom
Panel. Insert 1/4-20 x .60” Bolts through the caster bracket holes into the threaded holes in the Cabinet Bottom Panel.
Tighten the bolts. Push the lever on the two Locking Casters to lock so th e caster wheels do not roll.
Step 2
A. Cabinet Bottom Assembly
With Back Panel on floor, place Cabinet Bottom Panel against Back Panel edge and align the hole s. Install three
1/4-20 x .50 Bolts through the holes and secure with three 1/4-20 Nuts.
1/4-20 x .60” Bolt set
16 pc
1/4-20 x .50” Bolt set
3 pcs
Fixed Casters
Swivel Lock Casters