P. 10 User Guide
Valet Mode
When your vehicle is in Valet Mode, the remote starter and alarm (if configured) functionalities are
disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent
the engine from being remote-started accidentally.
¾ Any of the following features will put your remote car starter into Valet Mode:
• Ignition Valet: This feature allows you to put your system into Valet Mode by
using the ignition key.
• Remote valet: This feature allows you to put your system into Valet Mode by
using the transmitter.
• Valet switch: This feature allows you to put your system into Valet Mode by using a
push button switch (optional).
To put the system in t o Valet Mode
• To put the system in t o Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
The parking lights will flash three times.
b. Turn the ignition OFF.
The LED on the antenna will come ON solid to indicate that the vehicle has
successfully entered Valet mode.
The icon will appear on your LCD transmitter if you press LOCK or UNLOCK.
• To put the system in t o Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the UNLOCK and START/STOP buttons simultaneouslyfor more than 3 seconds.
The remote will beep once and then will beep once again when the icon appears
on the screen.
The parking lights will flash 3 times quickly and the LED on the antenna will come
ON solid to indicate that the vehicle has successfully entered Valet mode.
• To put the system in t o Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the ON position.
c. Within 5 seconds, press the push button switch until the parking lights flash 3 times.
d. Release the push button and turn the ignition to the OFF position.
The LED on the antenna will come ON solid to indicate that the vehicle has
successfully entered Valet mode.
The icon will appear on your LCD transmitter if you press LOCK or UNLOCK.
To put the system ou t o f Valet Mode
• To put the system ou t o f Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the IGNITION/RUN and OFF positions.
The parking lights will flash twice.
b. Turn the ignition OFF.
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
The icon will appear on your LCD transmitter if you press LOCK or UNLOCK.
• To put the system ou t o f Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the UNLOCK and START/STOP buttons simultaneously for more than 3 seconds.
The remote will beep once and then will beep once again when the icon
disappears on the screen.