Avalon Acoustics AVALON ASCENDANT Wiring Instructions, Connecting the Speaker to the Amplifier

3. Wiring Instructions

Introduction

The crossover is encapsulated in a chamber in the bottom of the speaker cabinet, minimizing the effect of vibration on the components. The Ascendant is equipped with a high-quality binding post for connecting the speaker cables. Spade lugs designed for #10 screws are recommended for cable termination.

Connecting the Speaker to the Amplifier

1.Place the speaker in its approximate location.

2.Connect the speaker wires to the binding post on the speaker back (see Figure 3.1).Check to insure the correct polarity (positive lead connected to the (+) post and negative lead connected to the (-) post.

WARNING: Do NOT over-tighten the screws.

3. Begin listening.

Figure 3.1 - Bottom view of the speakers showing the connections from the amplifier to the loudspeaker. Check to insure the correct polarity (positive lead connected to the (+) post and negative lead connected to the (-) post.

11