Defrosting Your Freezer

•When? For the most efficient operation and minimum energy consumption, defrost the freezer when the frost on the freezer walls is excessive or ¼ to ½ inch thick.

•Choose a time when the stock of frozen food is low.

CAUTION

Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. We recommend using the plastic scraper provided with your unit.

•Remove the frozen food from the freezer and place it in a cooler to protect the food.

•Turn the thermostat knob to “OFF”.

•Unplug the freezer. The Power Supply light should be off (amber light out).

•During defrosting, the ice melts into the cabinet.

•Remove the drain plug on the inside floor of the freezer by pulling straight out.

•Place a shallow pan outside drain outlet. The defrost water will drain out.

•Check the pan occasionally so the water does not overflow.

•Clean the interior of the freezer.

•Replace the plug on the inside floor.

•Reset the thermostat to desired setting.

•Allow the cabinet to cool for one hour.

•Return food to the freezer.

HELPFUL HINT:

Defrosting usually takes a few hours. Leaving the door open will help speed the process. Also, pouring warm water (not boiling) on the ice/frost will help speed melting. If you must use a scraper- please use caution - it is very easy to damage the freezer compartment and void your warranty.

The Freezer Compartment

•This compartment is designed for the long-term storage of frozen food. Storage time is up to three months.

•The storage life of frozen foods varies and the recommended storage time should not be exceeded. The instructions regarding the care of frozen foods should be followed when defrosting the freezer.

•Pre-packed commercially frozen food should be stored in accordance with the frozen foods manufacturer’s instructions for a three star frozen food storage compartment or home freezer.

•Place frozen food into the freezer as quickly as possible after purchase. If there are instructions on the packet, carefully follow these instructions regarding storage times.

•The freezer door is susceptible to breaking due to excessive ice build up. Be sure to defrost when the ice reaches ¼ to ½ inch thick.

•A storage basket is provided for the organization of odd-shaped items. To reach other packages in the freezer, just slide the basket to one side, or lift it out.

9

Page 8 Page 10
Page 9
Image 9
Avanti CF103 instruction manual Defrosting Your Freezer, Helpful Hint, Freezer Compartment
Page 8 Page 10

CF103 specifications

The Avanti CF103 is a renowned aircraft that has made significant strides in the world of aviation, particularly in the field of commuter and regional flights. This aircraft is known for its innovative design, impressive performance, and efficiency, making it an attractive option for airlines and passengers alike.

One of the standout features of the Avanti CF103 is its unique pusher propeller configuration. Unlike traditional aircraft that utilize puller propellers in front of the wings, the CF103's rear-mounted propellers are positioned behind the fuselage. This design provides several advantages, including reduced drag and improved aerodynamic efficiency. The pusher setup contributes to lower noise levels in the cabin and enhances passenger comfort during flight.

Powered by advanced turboprop engines, the CF103 boasts an impressive cruise speed, enabling it to compete effectively with jet-powered regional aircraft. The use of modern turboprop technology allows for better fuel economy, which is critical in today's aviation market where operational costs are of paramount importance. The aircraft's range is also commendable, making it suitable for a variety of regional routes without frequent refueling stops.

The Avanti CF103's cabin is designed with passenger comfort in mind. It features spacious seating arrangements that allow for a relaxing travel experience. The interior is equipped with modern amenities, ensuring that passengers enjoy a pleasant journey. Additionally, the aircraft is designed to facilitate quick boarding and deboarding, which is essential for short-haul flights.

Another key characteristic of the CF103 is its exceptional climb rate, which allows it to ascend rapidly to cruising altitude. This capability not only improves overall flight efficiency but also enhances safety by allowing the aircraft to avoid potential weather-related issues and air traffic congestion.

The cockpit of the Avanti CF103 incorporates cutting-edge avionics and navigation systems that enhance situational awareness for pilots. The integration of digital displays and advanced autopilot systems ensures that pilots can operate the aircraft with ease and precision.

In conclusion, the Avanti CF103 is a remarkable aircraft that excels in various aspects, including design, performance, and passenger experience. With its unique pusher propeller configuration, powerful turboprop engines, and a focus on comfort and efficiency, the CF103 stands out as a leading choice in the realm of commuter and regional aviation. Its thoughtful design and modern technology ensure that it remains competitive and relevant in the ever-evolving aviation landscape.
Top Page Image Contents