Avanti IM12-IS Problems With Your Ice Maker?, Troubleshooting Guide, Possible Cause

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a longer period of time, you need to take the proper steps to disconnect your appliance.

PROBLEMS WITH YOUR ICE MAKER?

You can solve many common ice maker problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

Problem	Possible Cause	Suggested Solutions
The compressor works	The voltage is lower than	Stop the ice maker and do not restart
abnormally with a buzzing	recommended.	until the voltage is normal.
Noise.
Water shortage indicator	There is not enough water in	Press the ON/OFF button, fill with water,
Light is on.	the reservoir.	wait 3 minutes and press the power
		button again to restart.
Ice full indicator light is on.	Ice storage cabinet is full to	Remove some of the ice.
	the top.
Indicator lights are off.	Blown fuse/ no power/blown	Replace fuse / turn power on.
	breaker
The ice made is too large	The water temperature in the	Stop the machine and reset the ice
and with pieces sticking	storage tray or ambient is too	making cycle. Restart the machine after
together.	low.	turning it off.
Conditions for ice making	Refrigerant leaks/ sealed	Replace unit.
cycle are right but no ice is	system is blocked.
made.

11