Dispensing ice.

Place the glass or cup directly below the dispenser and press gently against the dispenser actuator.

Remove the amount of ice as desired by continuously pressing against the dispenser actuator.

Once the desired amount of ice has been dispensed release the dispenser actuator and the machine will stop dispensing ice.

CARE AND MAINTENANCE

Caution

Failure to unplug the ice maker could result in electrical shock or personal injury.

Cleaning Your Ice Maker

To ensure the cleanliness of the ice cubes, water in the reservoir should be replaced every 24 hours.

Remove the drain plug to drain remaining water from the water reservoir when the ice maker will not be used for long period of time. Screw the drain plug back in place after the water has been drained.

Always change with fresh water before starting ice production at initial installation or after long shut-off periods.

Please clean your Ice maker regularly. When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals or diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting.

Space Requirements

During transportation, the incline angle of the cabinet should not be over 45°

Do not turn the Ice maker upside down. Problems could occur in the compressor and sealed system.

The Ice maker should be placed horizontally on a properly leveled surface.

To ensure proper ventilation for your Ice maker allow 6” of space at the top, the back and on each side.

Before using the Ice maker for the first time, please wait 2 hours after positioning it.

Clean the inner liner, ice-bin, water box, water cup frequently.

IMPORTANT: Do not install the Ice maker near an oven, radiator, or other heat source.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of your ice maker if you minimize the number of times the ice-bin is opened. If the power is going to be OFF for a longer period of time, you need to take the proper steps to disconnect your appliance.

12

Page 12
Image 12
Avanti IMD250 instruction manual Care and Maintenance,  Cleaning Your Ice Maker,  Space Requirements,  Power Failure

IMD250 specifications

The Avanti IMD250 is a modern marvel in the realm of home kitchen appliances, particularly designed for those who want to simplify their cooking processes without compromising on quality. This innovative appliance is a multi-function kitchen device that caters to a wide array of cooking needs, making it an essential addition to any culinary enthusiast's toolkit.

One of the main features of the Avanti IMD250 is its multi-cooker capability. It allows users to steam, sauté, slow cook, and even pressure cook a variety of dishes, thereby providing an extensive range of cooking options in one compact unit. This not only reduces the need for multiple kitchen gadgets but also saves valuable counter space.

In terms of technology, the Avanti IMD250 utilizes advanced cooking technology to ensure consistent and efficient cooking results. Its smart control panel is designed for ease of use, featuring pre-set cooking programs that take the guesswork out of meal preparation. This means that users can simply select a desired program for their dish, and the appliance will automatically adjust the cooking time and temperature accordingly.

One of the standout characteristics of the Avanti IMD250 is its large capacity. With ample space for meals, it can easily cater to families or gatherings, allowing for the preparation of large quantities of food at once. This is particularly convenient for busy households where meal prep is often a challenge.

Safety is another area where the Avanti IMD250 shines. It comes with several safety features, including a secure locking lid that prevents steam from escaping during pressure cooking, as well as an automatic shut-off function that activates at the end of a cooking cycle. These features offer peace of mind, ensuring that users can cook confidently without worrying about accidents.

Moreover, the Avanti IMD250 is designed with easy cleaning in mind. Many of its components are dishwasher safe, and the non-stick cooking pot provides an effortless cleanup experience. This focus on convenience makes it an excellent choice for those who are short on time but still desire home-cooked meals.

In summary, the Avanti IMD250 is a versatile and efficient kitchen appliance that boasts multi-cooking capabilities, smart technology, large capacity, robust safety features, and easy maintenance. Its design and functionality make it a valuable asset for anyone looking to enhance their culinary experience without the hassle of traditional cooking methods. Whether you are a novice in the kitchen or a seasoned chef, the Avanti IMD250 is sure to meet your cooking needs with ease and efficiency.