PROBLEMS WITH YOUR ICE MAKER?

You can solve many common ice maker problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

Problem

 

Possible Cause

Suggested Solutions

The compressor works

The voltage is lower than

Stop the ice maker and do not restart

abnormally with a buzzing

required

until the voltage is normal.

noise.

 

 

 

Water shortage indicator

There is not enough water

Press the power button, fill with water,

Light is ON.

in the reservoir.

press the power button again to

 

 

 

restart.

Indicator lights are OFF.

1.

Blown home fuse/ no

Replace fuse / turn power on.

 

power/blown breaker

 

There is no water or water level

1.

Dirty water level probe

Clean the water tank, especially the

is low, but the lack of water

2.

Broken probe circuit

two stainless steel water level probes

indicator is not on

 

 

Call the service

Lack of water indicator is ON,

1. Abnormal water resistant

1. Add a little salt inside the water

but there is enough water inside

value

2. Call the customer service dept.

the water tank.

2.

Broken probe circuit

 

Conditions for ice making cycle

Refrigerant leaks/ sealed

Replace unit.

are right but no ice is made.

system is blocked.

 

 

 

 

Both alert and ice full indicators

The water tray does not

Check for blocked ice cubes, restart

are on.

turn.

the unit.

ATTENTION 

ICE MAKER USAGE

For best results and most efficient operation of your ice-maker, it is recommended that you consume the ice as it is made or store the cubes in a separate container. Ice cubes left in the ice-bin will begin to slowly melt and the water will re-deposit into the water tray.

If you are not going to consume the ice cubes as they are made, do not fill the water tray to the full line while the ice-bin is full.

When the red “ICE FULL” indicator is on, remove the cubes and store in a separate suitable container.

If you plan to leave the unit running overnight, it is recommended that you remove any cubes left in the bin and store in a separate container.

If at any time the “ICE FULL” and “ADD WATER” indicators are on and flashing at the same time, push the POWER button, remove all the ice from the drawer, check and fill water when needed, wait for 3 minutes and then push Power button to start the ice making again.

This unit is not designed to store the ice cubes produced for long periods of time.

13

Page 13
Image 13
Avanti IMD250 Problems with Your ICE MAKER?, Troubleshooting Guide, Problem Possible Cause Suggested Solutions

IMD250 specifications

The Avanti IMD250 is a modern marvel in the realm of home kitchen appliances, particularly designed for those who want to simplify their cooking processes without compromising on quality. This innovative appliance is a multi-function kitchen device that caters to a wide array of cooking needs, making it an essential addition to any culinary enthusiast's toolkit.

One of the main features of the Avanti IMD250 is its multi-cooker capability. It allows users to steam, sauté, slow cook, and even pressure cook a variety of dishes, thereby providing an extensive range of cooking options in one compact unit. This not only reduces the need for multiple kitchen gadgets but also saves valuable counter space.

In terms of technology, the Avanti IMD250 utilizes advanced cooking technology to ensure consistent and efficient cooking results. Its smart control panel is designed for ease of use, featuring pre-set cooking programs that take the guesswork out of meal preparation. This means that users can simply select a desired program for their dish, and the appliance will automatically adjust the cooking time and temperature accordingly.

One of the standout characteristics of the Avanti IMD250 is its large capacity. With ample space for meals, it can easily cater to families or gatherings, allowing for the preparation of large quantities of food at once. This is particularly convenient for busy households where meal prep is often a challenge.

Safety is another area where the Avanti IMD250 shines. It comes with several safety features, including a secure locking lid that prevents steam from escaping during pressure cooking, as well as an automatic shut-off function that activates at the end of a cooking cycle. These features offer peace of mind, ensuring that users can cook confidently without worrying about accidents.

Moreover, the Avanti IMD250 is designed with easy cleaning in mind. Many of its components are dishwasher safe, and the non-stick cooking pot provides an effortless cleanup experience. This focus on convenience makes it an excellent choice for those who are short on time but still desire home-cooked meals.

In summary, the Avanti IMD250 is a versatile and efficient kitchen appliance that boasts multi-cooking capabilities, smart technology, large capacity, robust safety features, and easy maintenance. Its design and functionality make it a valuable asset for anyone looking to enhance their culinary experience without the hassle of traditional cooking methods. Whether you are a novice in the kitchen or a seasoned chef, the Avanti IMD250 is sure to meet your cooking needs with ease and efficiency.