INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
•Remove the exterior and interior packing.
•Check to be sure you have all of the following parts:
| Model WBV19DZ |
| Model WCV38DZ |
| Wine / Beverage Center |
| Dual Zone Wine Chiller |
1 | Instruction Manual | 1 | Instruction Manual |
5 | Wine Bottle Shelves (Wire) | 10 | Wine Bottle Shelves (Wire) |
1 | Wine Bottle Small Shelf (Wire) | 2 | Wine Bottle Shelf / Basket (Wire) |
3 | Beverage Shelves (Glass) | 4 | Keys |
1 | Storage Basket (Wire) |
|
|
4 | Keys |
|
|
•Before connecting this appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR APPLIANCE
•This appliance is designed to be for free standing installation or
•Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level your appliance, adjust the front leveling legs at the bottom of the appliance.
•Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
•Avoid locating the unit in moist areas.
•Plug the appliance into an exclusive, properly
BUILT – IN CABINET INSTRUCTIONS
This unit is designed for both
Cabinet Opening Dimensions
| IN (min) | CM (min) |
Width | 24” | 61 cm |
Depth | 24” | 61 cm |
Height | 34 ½” | 87.6 cm |
11
