Establishing the Hunt
Group/Pilot #
Enter whatever name you want here. This name will appear on the display of the phones calling Voice Portal.
Set ISDN Caller Display to
“grp-name”
Voice Portal | 10 |
5.3 CONFIGURE HUNT GROUP FOR VOICE PORTAL STATIONS
You will need to create a hunt group for the stations you defined for Voice Portal. The group extention is the pilot number that is used to call the application. In Figure (below) the Group Extension shown as 7915 is only an example.
Figure 8: HUNT GROUP - Tab 1
When creating a Hunt Group, whatever name or number you enter in the Group Name field will appear on the telephones calling into the application.
The screen below shows examples of a Group Name and Group Extention. The rest should be left as default.
Note: Make sure you set the ISDN Caller Display Field to
5.3.1SETTING EXTENSION NUMBERS IN HUNT GROUP
Here is where you will enter the extension numbers created for Voice Portal. These are the group of numbers associated with the pilot number you defined earlier.
NOTE: Hunt Groups can contain as many as 1000 numbers. Enter only the numbers you have defined for your application (see section 5.2 in this Config Note).
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
