![](/images/new-backgrounds/1140417/14041711x1.webp)
2.
Configure switch port inline power
1.Click Device View on the Toolbar.
2.Select Physical Interface
3.The following window displays the switch default power configuration.
Figure 5: Port Inline Power Configuration
Note that for all ports, Power State is Inactive and Profile is set to Not Guaranteed, as there are no Powered Devices (PDs) connected to the switch.
The screen lists the following information for all the switch ports:
Power State
The Power over Ethernet status for that port. This can take one of the following values:
•Active — The port is currently delivering power.
•Inactive — No device is currently requesting power from the port.
SZ; Reviewed: | Solution & Interoperability Test Lab Application Notes | 6 of 14 |
WCH 3/19/2004 | ©2004 Avaya Inc. All Rights Reserved. |